Your Representative for Leading Plastic Processing Equipment

Back to Top
IMG_7835
IMG_7832IMG_7833IMG_7834IMG_7835

1997 Nissei Model FS210S50ASE Injection Molding Machine

  • 232 US ton Clamp Force
  • 16 oz Injection Capacity
  • NC9000G Controller
  • 22.44″ x 22.44″ Between Tie Bars
  • 32.5″ x 32.5″ Platen Dimensions
  • 10.4″ Minimum Mold Thickness
  • 32.1″ Maximum Daylight
  • Core Pull
  • 230 Volt
IMG_1659
IMG_1663IMG_1664IMG_1661IMG_1660IMG_1659

2004 Nissei Model FN4000-36A Injection Molding Machine(s)

  • 200 US Ton Clamp force
  • 14.8 oz Injection Capacity
  • NC9300T Controller
  • 20.9″ x 20.9″ Tie Bar Spacing
  • 30.3″ x 30.3″ Platen Dimensions
  • 9.8″ Min. Mold Thickness
  • 37.4″ Max. Daylight
  • Air Blow
  • Core Pull
  • 230 Volt
  • Each Machine has Approximately 55,000 to 60,000 hours
  • Four Machines Available.  Not all machines are pictured but they are representative of condition of each machine
  • Call for Pricing
IMG_1625
IMG_1616IMG_1617IMG_1628IMG_1629IMG_1625IMG_1615

2012 Nissei Model FNX360-140A Injection Molding Machine

  • 400 US Ton Clamp Force
  • 47.2 oz Injection Capacity
  • TACT Controller
  • 28.9″ x 28.9″ Tie Bar Spacing
  • 41.5″ x 41.5″ Platen Dimensions
  • 13.8″ Min. Mold Thickness
  • 52″ Max Daylight
  • Core Pull with Special Sequence
  • Air Blow
  • Mixing Screw
  • Approximately 12,000 Production Hours
  • Maguire Blender is also Available
IMG_1637
IMG_1639IMG_1637IMG_1636IMG_1634IMG_1633IMG_1645

2014 Nissei Model FNX360-140A Injection Molding Machine

  • 400 US Ton Clamp Force
  • 47.2 oz Injection Capacity
  • TACT Controller
  • 28.9″ x 28.9″ Tie Bar Spacing
  • 41.5″ x 41.5″ Platen Dimensions
  • 13.8″ Min. Mold Thickness
  • 52″ Max Daylight
  • Core Pull with Special Sequence
  • Air Blow
  • Mixing Screw
  • Approximately 12,000 Production Hours
  • Maguire Blender is also Available
NEX30-Front
NEX30-FrontNEX30 HoursNEX30-ControllerNEX30-Control CabinetNEX30- Stationary PlatenNEX30 Backside

Nissei NEX30-1E All Electric Injection Molding Machine

Product Description

33 US Ton Clamping Force
0.3 oz. Injection Capacity
11.4″ x 11.4″ Tie Bar Spacing
16.5″ x 16.9″ Platen Dimension
TACT IV Controller
All Electric Machine
230 Volt
14 mm Reciprocating Screw
One Year Warranty

← Back    


Premier Plastics: Representing the BEST plastic processing equipment so that our customers can be the BEST plastic manufacturers.